* Check operation of electrical equipment and switches
* Check front tire pressure and inspect tread
* Check front wheel spoke tightness (if equipped)
* Inspect clutch fluid system for leaks, contact, or abrasion (for hydraulic clutch models)
* Check DOT 4 clutch fluid for moisture (for hydraulic clutch models)
* Check hand control fastener, clutch lever fastener, and master cylinder clamp fastener torque.
* Check, adjust, and lubricate throttle and clutch cables * Replace engine oil and filter
* Check engine coolant freeze point and inspect for leaks (if equipped)
* Clean radiators or oil cooler (if equipped)
* Replace Primary chaincase lubricant
* Replace Transmission lubricant
* Inspect and clean air filter
* Check upper front stabilizer link and isolator mounting fastener torque (Sportster)
* Inspect oil lines and brake system for leaks, contact, or abrasion
* Inspect fuel lines and fittings for leaks, contact, or abrasion Inspect rear brake fluid levels and check for moisture
* Inspect brake pads and discs for wear
* Check front axle nut torque Inspect and lubricate jiffy stand
* Check, adjust, and lubricate brake and clutch control
* Check tightness of rear wheel spokes (if equipped)
* Check rear tire pressure and tread Inspect and adjust drive belt and sprocket
* Check rear axle nut torque Inspect exhaust system for leaks, cracks, loose or missing fasteners, and heat shields
* Lubricate fuel door hinge (if applicable)
* Road test to verify component and system operation

Everything in the 1K and 5K but also includes:

* Inspect windshield bushings if equipped
* Check and adjust steering head bearings (Sportster)

Everything in the 5K but also includes:

* Adjust and lubricate steering head bearings (Big Twin)

* Replace spark plugs every 30,000 miles
* Flush brake system and replace DOT 4 fluid every 2 years or sooner if moisture content is 3% or higher
* Check battery terminal torque and clean connections annually
* Replace fuel filter element every 100,000